Tools and brushes for polishing wood A large number of advanced tools will not be necessary, but for a good quality work, they must be sharp. You'll need a plane, preferably with an adjustable mouth, and perhaps most important in finishing, cabinet scraper.
Sanding
Sanding blocks made of cork or rubber can be purchased, or you can stick a piece of felt or rubber for a block of wood. The block must be large enough to wrap a quarter sheet of sandpaper around a standard size. Apply Rottenstone with pumice and a block-based marker.
Sticks and ankles are useful. Wrap Abrasive turn ordinary pieces, round for wall or the profile of your own unusual shapes.
The machines can perform some work. Sanders for electric drills leave bad circular scratches. Do not touch. Belt sanders are heavy, powerful, Expen ¬ sive machinery to remove the things that really difficult. A moment of inattention and you find that you have passed through a varnish or a trench dug in the woods. Rub belts (expensive) with a wire brush to clear any blockage. Orbital sanders and finish are the best bet.
Strip-ping
Wire (steel) for wool is the material standard pickling, and you'll need putty and decorators filler and Daggers (Hook scraper is effective, but the scars easily the surface).
A wire brush will remove any bits of waste from the grain, and a brass brush shoe cleaning, a nail brush and a toothbrush will all be needed at a time.
pins and toothpicks are all very sharp useful for carvings and moldings.
hot air strippers make more sense than for torches furniture, but very sweet. They are the best for painting on flat surfaces, and useless for synthetic lacquers. Never use heat tape veneer.
Brushes
Polish (which here includes polyurethanes) buy a better quality 35-50mm (l-1/2-2in.) Brush and never use it for anything else. Real hair is always better than nylon for a good finish. You need full bristles, slightly conical, along with some flag to control the flow. In cheap brushes, two rows of bristles are too far apart for the liquid and drain well.
Brushes Fine artists will be necessary to reach color; mops bear, marten or squirrel hair "for shellac in the left corners and a grass" or nylon brush for whitening products. The best is "tarnishing" brush (brush to scrub the furniture), for the laying of pumice powder to a shiny finish.
Posted on January 15, 2010.
